p-Thiocresol Functionalized Cesium Lead Bromide (PTC@CsPbBr3): A Fluorometric Sensing Probe for the Detection of Cholesterol.

Inorganic halide-based perovskites (e.g., cesium lead bromide) are tremendously useful semiconducting materials due to their unique optoelectronic properties. However, degradation of these perovskites under humid conditions is one of the major drawbacks to prevent their wide applications. Herein, passivated cesium lead bromide nanoparticles are synthesized using p-thiocresol as a passivating ligand, and this stable version of perovskite is later applied successfully as a sensor probe towards cholesterol detection. The designed sensor can detect cholesterol with a lower detection limit of 0.24 ppm and a fast response time of 10 s. The mechanism of quenching PTC@CsPbBr3 upon the gradual addition of cholesterol is discussed. Further, the sensor is successfully applied in the detection of cholesterol in real samples (blood serum). This work presents PTC@CsPbBr3 as a novel sensing platform for detecting cholesterol well in biomedical applications.

Aluminum Montmorillonite/Polyaniline Hybrid Composite-Based Organogels for the Expurgation of Carcinogenic Chlorophenols and Congo Red Dye from Defiled Water Sources.

Chlorophenol and Congo Red dye being highly toxic are well known for their carcinogenic activity. This work focuses on preparing an organogel for the removal of both chlorophenol and Congo Red. PAni molecules were grafted in situ between the layers of montmorillonite (MMT) to form a PAni/MMT composite, which was further modified to form a gel structure. The composite was thoroughly characterized by high-resolution X-ray diffraction (HR-XRD), Fourier transform infrared (FT-IR) analysis, Brunauer-Emmett-Teller (BET) analysis, and thermogravimetric analysis (TGA). The gel was further analyzed by scanning electron microscopy (SEM) and by studying the rheological properties. The resulting gel exhibited an impressive solvent uptake, with a maximum of 2084% (20 times) for chlorophenol, while the dye adsorption capacity was 349.72 mg/g with 99.44% removal efficiency. The adsorption proceeded with the pseudo-second-order model followed by the Langmuir monolayer adsorption model and Weber's intraparticle diffusion model. The sorbent was found to be selective among cationic dyes while retaining 83% of dye even in the fifth cycle. The hybrid sorbent shows great promise for sustainable purposes, and the results of this study are certainly encouraging.

CsPbBr3 perovskite quantum dot decorated ZIF-8 MOF: a selective dual recognition fluorometric visual probe for 4-nitroaniline and rhodamine blue.

The uses of highly luminescent perovskite quantum dots in real analytical detection were limited by their supersensitive nature. Here, we have designed a CsPbBr3 perovskite based fluorometric sensor by integrating them with a zeolitic imidazole framework (ZIF-8) via an in situ one step technique and established its stability in aqueous and other polar solvents. The CsPbBr3@ZIF-8 luminescence sensor functioned excellently for the trace detection of 4-nitroaniline and rhodamine blue dye molecules with a detection limit value of 8.367 ppb and 0.088 ppm, respectively. A comprehensive investigation found that the quenching of the fluorescence signal occurred via fluorescence resonance energy transfer (FRET) for rhodamine blue dye and a H-bonding interaction induced trap density mediated quenching mechanism was responsible for 4-NA detection. The potential of this suggested sensor as a cheap portable test paper probe for analyte detection was also explored. This study introduces CsPbBr3 as a cutting-edge sensing platform for industrial pollutants such as dye molecules and nitroaromatics.

Surface modification of electrospun PVA/chitosan nanofibers by dielectric barrier discharge plasma at atmospheric pressure and studies of their mechanical properties and biocompatibility.

In this paper, surface of electrospun PVA/Cs nanofibers is modified using dielectric barrier discharge (DBD) plasma and the relationship between the observed mechanical properties and biocompatibility of the nanofibers and plasma-induced surface properties is discussed. Plasma treatment of electrospun PVA/Cs nanofibers is carried out with both inert (argon, Ar) and reactive (oxygen, O2) gases at atmospheric pressure. Incorporation of oxygen-containing polar functional groups on the surface of Ar-plasma treated (PVA/Cs/Ar) and O2-plasma treated (PVA/Cs/O2) nanofibers and increase in surface roughness contribute to the improvement of surface wettability and the decrease of contact angle with water of the nanofibers. Both PVA/Cs/Ar and PVA/Cs/O2 nanofibers show high tensile strength (11.6-15.6%) and Young's modulus (33.8-37.3%) as compared to the untreated one. Experimental results show that in terms of haemolytic activity the PVA/Cs/Ar and PVA/Cs/O2 nanofibers do not cause structural changes of blood cells and meet the biocompatibility requirements for blood-contacting polymeric materials. MTT cell viability results further reveals improvement in biocompatibility of PVA/Cs nanofibers after Ar and O2 plasma treatment. The results suggest that DBD plasma treated electrospun PVA/Cs nanofibers have the potential to be used as wound dressing and scaffolds for tissue engineering.

Flexible Asymmetric Supercapacitor Based on Functionalized Reduced Graphene Oxide Aerogels with Wide Working Potential Window.

Flexible energy storage devices are in great demand since the advent of flexible electronics. Until now, flexible supercapacitors based on graphene analogues usually have had low operating potential windows. To this end, two dissimilar electrode materials with complementary potential ranges are employed to obtain an optimum cell voltage of 1.8 V. A low-temperature organic sol-gel method is used to prepare two different types of functionalized reduced graphene oxide aerogels (rGOA) where Ag nanorod functionalized rGOA acts as a negative electrode while polyaniline nanotube functionalized rGOA acts as a positive electrode. Both materials comprehensively exploit their unique properties to produce a device that has high energy and power densities. An assembled all-solid-state asymmetric supercapacitor gives a high energy density of 52.85 W h kg-1 and power density of 31.5 kW kg-1 with excellent cycling and temperature stability. The device also performs extraordinarily well under different bending conditions, suggesting its potential to meet the requirements for flexible electronics.

Synthesis of ZnO nanoparticles and evaluation of antioxidant and cytotoxic activity.

ZnO nanoparticles were synthesized by thermal decomposition method and were characterized by UV-vis spectroscopy, XRD, SEM, EDX and TEM analysis. The resultant nanoparticles are nearly spherical and size is in the range of 40-50 nm. The antioxidant behavior of ZnO nanoparticles was assessed by scavenging free radicals of 2,2-diphenyl-1-picrylhydrazyl hydrate (DPPH) with varying nanoparticle concentration and time interval individually. The DPPH scavenging activity was monitored by UV-vis spectrophotometer. ZnO nanoparticles were also showing cytotoxic activity which was studied by hemolytic potentiality test.

Synthesis and evaluation of antioxidant and antibacterial behavior of CuO nanoparticles.

CuO nanoparticles were synthesized by thermal decomposition methods and characterized by UV-visible spectroscopy, XRD and TEM analysis. The resultant particles are nearly spherical and particle size is in the range of 15-30 nm. The antioxidant behavior of synthesized CuO nanoparticles was evaluated by scavenging free radicals of 2,2-diphenyl-1-picrylhydrazyl hydrate (DPPH). The free radical scavenging activity of CuO nanoparticles was monitored by UV-visible spectrophotometry. The antibacterial activity of CuO nanoparticles was tested against different bacterial strains. CuO nanoparticles showed efficient antioxidant activity and bactericidal effect against Eschericia coli and Pseudomonas aeruginosa.